Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


Table of Contents

Introduction

...

DiscDescription
Playing time74 minutes, 33 seconds maximum
RotationCounter-clockwise when viewed from readout surface
Rotational speed1.2-1.4 m/sec.
Track pitch1.6 µm
Diameter120 mm
Thickness1.2 mm
Center hole diameter15 mm
Recording area46 - 117 mm
Signal area50 - 116 mm
MaterialAny transparent material with 1.55 refraction index. Usually polycarbonate 
Minimum pit length0.833 µm (1.2 m/sec.) to 0.972 µm (1.4 m/sec.)
Maximum pit length3.05 µm (1.2 m/sec.) to 3.56 µm (1.4 m/sec.)
Pit depthApproximately 0.11 µm
Pit widthApproximately 0.5 µm
Number of channels2 channels (four channel recording possible)
Quantization16-bit linear quantization
Quantizing timingConcurrent for all channels
Sampling frequency44.1 kHz
Channel bit rate4.3218 Mbps
Data bit rate2.0338 Mbps
Data-to-channel bit ratio8:17
Error correction codeCross Interleave Reed-Solomon Code (CIRC) (with 25% redundancy)
Modulation systemEFM

...

SpecificationDescription
Channels2 channel (stereo)
Bit-depth16-bit
Data encodingLinear PCM
Sample rate44.1 kHz

The sample rate of 44.1 kHz was inherited from the widespread practice of using a PCM adaptor to convert digital audio into an analogue video signal for storage on a U-matic videocassette. This was the most economical way of transferring audio from the recording studio to CD manufacturers.

...

CD-DA data is addressed on the compact disc using a timecode system of minutes, seconds, and frames, expressed in mm:ss:ff. Timecode frames (i.e., sectors) are the smallest addressable time intervals on a CD-DA and correspond to 1/75th of a second of audio. Timecode frames are distinct from the data frames described above. Each sector can hold 98 data frames, or 2,352 bytes of audio data. The CD is played at 75 timecode frames per second, or 176,400 bytes per second (1,411,200 bit/s).

In other words, CD-DA data transfers at a bit rate of 1.4 Mbit/s.

...