Skip to end of metadata
Go to start of metadata
You are viewing an old version of this page. View the current version.
Compare with Current
View Page History
« Previous
Version 9
Next »
Prepare desktop computer
- Remove all media and devices (e.g., CDs, DVDs, digital media player).
- Turn off all attached devices.
- Turn off desktop computer.
- Disconnect all power cords from electrical outlets.
- Disconnect all power cords, I/O cables, and any other cables connected to the desktop computer.
- Remove any locking device that secures the side panel of the desktop computer.
- Optional step: review manufacturer documentation on removing the internal hard drive.
Prepare temporary evidence storage area
- Obtain small empty plastic container from digital forensics lab supply area.
- Label plastic container with:
- Accession ID
- Evidence ID
- Name of examiner
- Date
- Obtain polypropylene sleeve from digital forensics lab supply area.
- Place polypropylene sleeve inside plastic container.
- Place plastic container in temporary evidence storage area near forensic workstation.
Remove side panel from computer tower
- Remove two screws that secure side panel and place in plastic container.
- Press the cover-release button on the side panel.
- Slide side panel to the rear of the computer to remove the panel.
- Place piece of painter’s tape on side panel.
- Write Evidence ID on tape.
- Place side panel in evidence storage area.
Examine hard drive cables
- Locate each end of the power supply cable.
- Locate each end of the SATA cable.
Detach cables from hard drive
- Detach power supply cable.
- Detach SATA cable.
- Leave power supply and SATA cables attached to motherboard.
Remove cooling fan
- Remove four cooling fan screws and place in plastic container.
- Leave cooling fan connected to motherboard.
Remove hard drive
- Move cooling fan below the hard drive enclosure.
- Use blue plastic handle to pull hard drive out of enclosure.
Remove plastic hard drive handle
- Remove plastic hard drive handle.