...

Note: photographic prints are often intermingled with other archival material, including textual records, slides, and negatives. This material usually follows a similar digitization workflow, but requires different scanners and technical specifications. See the appropriate section of the Digital Collections Handbook for guidance on intermingled formats.

Retrieve material from physical storage

...

1. Retrieve material from physical storage.
   
   
   1. If necessary, obtain permission to access physical storage from responsible department or unit. 
      
      
   2. If necessary, log into the Archives Catalogue to confirm the physical location of the material. 
      
      
2. If material is retrieved for an Archives Document Delivery Request, place material on the “To Be Scanned” shelf in the Scanning Room.
   
   
3. If material is retrieved for a routine digitization project or other purposes, ensure that retrieved material is placed in secure temporary storage for the duration of the project.

Identify digitization equipment

...

Note: The Libraries' digitization equipment is for internal projects. Libraries staff must book the equipment through the meeting room booking system. Consult the Digitization Coordinator for assistance identifying digitization equipment.

Determine technical specifications for scanning job

...

1. Consult the technical specifications for photographs, slides, and negatives for technical specifications. In some cases, alternative specifications can be used. Consult the Digitization Coordinator before using non-standard technical specifications.

1. Determine the best file “prefix” to be used by the scanning software. Prefixes used in archives digitization projects must mimic "reference codes" assigned to the analog source material. Appendix B provides some guiding principles for file naming and file organization.
   
   
2. Determine the desired hierarchical organization of the digital files. Appendix B provides some guiding principles for file naming and file organization.

Conduct copyright assessment if necessary

...

Note: Digitization activities must comply with the Copyright Act and Dalhousie Fair Dealing Guidelines. A copyright assessment for each file or item may not always be necessary (e.g., in cases where material is in the public domain). Consult with the Project Manager or Libraries’ Copyright Services Coordinator for guidance as necessary.

1. Assess the material for privacy and confidentiality concerns in accordance with Section D.2 of the Libraries’ Takedown Request Protocol. 
   
   
2. Check the copyright and licensing status of the material in accordance with Section D.4 of the Libraries’ Takedown Request Protocol.
   
   
3. If the conditions in Section D.2 are satisfied and none of the conditions in Section D.4 apply, conduct a risk assessment using the Libraries’ Copyright Assessment Tool.
   
   
4. Documentation: Document the risk assessment using the Libraries’ Copyright Assessment Worksheet. Retain the worksheet and ensure it is filed in accordance with Dalhousie's Records Management Policy.
   
   
5. Attach a copy of the Copyright Assessment Worksheet to the file folder.
   

Identify other workflow issues

...

Note: this section is intended for mass digitization projects that require an "assembly line" workflow. The procedures may not be required for all projects. Consult with the Project Manager or Libraries' Digitization Coordinator for guidance as necessary.

1. Assess the material and determine whether its physical characteristics will disrupt the digitization workflow and/or affect the desired digital "master files" and “access” copy. Workflow issues can occur when digitizing material such as:
   
   
   1. Bound scrapbooks or photo albums
   2. Fragile or torn items
   3. Oversize photographic prints too large for the book scanner
   4. Files that include a mix of photographic prints and textual records
   5. Files that include a mix of photographic prints and negatives or slides

Physically prepare photographic slides for digitization

...

Note: Digitization of photographic material usually requires the scanner operator to consider physical storage issues and assign new item-level reference codes to each item. Physical rehousing may be required to achieve desired results. Physical preparation of photographic slides may occur in tandem with physical preparation of textual records, or photographic prints, or photographic negatives. See the Project Manager or Libraries' Digitization Coordinator for guidance.

1. Find a clean flat surface where the photographic slides can be handled.
   
   
2. Assess current physical storage and arrangement of slides. Identify tasks required to physically rehouse the slides in archival quality storage containers and assign item-level reference codes. 
   
   

3. Assign item-level reference codes and physically rehouse material as required. 
   
   

   1. Note: Archival material can only be physically separated during archival processing and digitization if the file- or item-level archival descriptions are cross-referenced. The finding aid must include notes that help document the manner in which the material was kept by the creator.
   2. Small amounts of photographs can be physically arranged and assigned physical storage locations and item-level reference codes as part of the “PB Box” system.
   3. Large amounts of photographs can be physically arranged into one or more boxes and assigned physical storage locations and item-level reference codes as part of a sequence of boxes that are physically grouped together by fonds- or collection-level reference code.
   4. Photographs can be physically arranged in a manner that reflects the intellectual arrangement in the finding aid, but it is not necessary. Items can be intellectually arranged in a manner that does not match the physical storage locations and corresponding item-level reference codes.
      
      

4. Refer to the following table for guidance:
   
   

   Format / size	Preferred physical storage	Item-level reference code
   35 mm slides	Plastic 35 mm slide storage sheet in letter-sized archival file folder in letter-sized coroplast document box	Written in fine tip sharpie on each row of plastic sheet (i.e., provide range of reference codes for each row)

   
   

5. Assign physical locations to each item or update existing physical location information as required.
   
   
6. Refer to the Technical specifications for digital "master" files and the Archives processing manual for guidance.
   
   
7. Review prepared file and consider post-digitization issues that would be helpful to flag at this stage in the process (e.g., shelving, cataloguing).
   
   
8. If a file includes a mix of photographic slides and textual records, also complete procedures described in the instructions on physically preparing textual records.
   
   
9. If a file includes a mix of photographic slides and prints, also complete procedures described in the instructions on physically preparing photographic prints.
   
   
10. If a file includes a mix of photographic slides and negatives, also complete procedures described in the instructions on physically preparing photographic negatives.
    
    
11. Bring prepared file to scanner for digitization.

Optional - complete file preparation checklist

...

Note: The Digitization File Preparation Checklist is intended for mass digitization projects that require an "assembly line" workflow. The checklist can also serve as a useful guide for routine digitization activities, but it is not required for all projects. Consult with the Project Manager or Libraries' Digitization Coordinator for guidance as necessary.

...